SLING / LASHING ROPE
The large size of the outer wires gives this class excellent abrasion resistance, which is applied for harsh condition.
Applications:
Sand Line, Marine, Lashing
Features:
» Excellent bendability and resistance to fatigue
» Very flexible and sustainable for sling or general purpose
6x7+FC
DIAMETER | WEIGHT | MINIMUM BREAKING STRENGTH | |||||
INCH | MM | LB/FT | KG/M | IPS(TONS) | 1770(KN) | EIPS(TONS) | 1960(KN) |
6 | 0.08 | 0.12 | 21.2 | 23.4 | |||
1/4 | 0.09 | 0.14 | 2.64 | 2.90 | |||
7 | 0.11 | 0.17 | 28.8 | 31.9 | |||
5/16 | 0.15 | 0.22 | 4.10 | 4.51 | |||
8 | 0.15 | 0.22 | 37.6 | 41.6 | |||
9 | 0.19 | 0.28 | 47.6 | 52.7 | |||
3/8 | 0.21 | 0.31 | 5.86 | 6.45 | |||
10 | 0.23 | 0.35 | 58.8 | 65.1 | |||
11 | 0.28 | 0.42 | 71.1 | 78.7 | |||
7/16 | 0.29 | 0.43 | 7.93 | 8.72 | |||
12 | 0.33 | 0.50 | 84.6 | 93.7 | |||
1/2 | 0.37 | 0.56 | 10.3 | 11.3 | |||
13 | 0.39 | 0.58 | 99.3 | 110 | |||
14 | 0.45 | 0.68 | 115 | 128 | |||
9/16 | 0.47 | 0.70 | 13.0 | 14.3 | |||
5/8 | 0.58 | 0.87 | 15.9 | 17.5 | |||
16 | 0.59 | 0.88 | 150 | 167 | |||
18 | 0.75 | 1.12 | 190 | 211 | |||
19 | 0.84 | 1.25 | 212 | 235 | |||
3/4 | 0.84 | 1.25 | 22.7 | 25.0 | |||
20 | 0.93 | 1.38 | 235 | 260 | |||
22 | 1.12 | 1.67 | 284 | 315 | |||
7/8 | 1.15 | 1.70 | 30.7 | 33.8 | |||
24 | 1.34 | 1.99 | 338 | 375 | |||
1 | 1.50 | 2.23 | 39.7 | 43.7 |
Note: 1. To convert to kilonewtons (kN), multiply tons by 8.896.
2. To convert to pound (Lbs), multiply tons by 2000.
6x24+FC
DIAMETER | WEIGHT | MINIMUM BREAKING STRENGTH | |||||
INCH | MM | LB/FT | KG/M | IPS(TONS) | |||
3/8 | 9.5 | 0.19 | 0.289 | 4.77 | |||
1/2 | 12.7 | 0.34 | 0.513 | 8.40 | |||
9/16 | 14.3 | 0.44 | 0.649 | 10.6 | |||
5/8 | 15.9 | 0.54 | 0.801 | 13.0 | |||
3/4 | 19.1 | 0.78 | 1.154 | 18.6 | |||
7/8 | 22.2 | 1.06 | 1.571 | 25.2 | |||
1 | 25.4 | 1.38 | 2.052 | 32.8 | |||
1 1/8 | 28.6 | 1.74 | 2.597 | 41.2 | |||
1 1/4 | 31.8 | 2.15 | 3.206 | 50.7 | |||
1 3/8 | 34.9 | 2.61 | 3.879 | 61.0 | |||
1 1/2 | 38.1 | 3.10 | 4.616 | 72.3 | |||
Note - 1. To convert to kilonewtons (kN), multiply tons by 8.896. | |||||||
• All materials produced according to federal specifications RR-W-410 / ASTM A 1023 & mill specs.
• Minimum breaking strength for final-galvanizing ropes 10% lower than value listed.
• The acceptance stregnth shall be not less than 2 1/2 percent below the normal strength.
• Sizes above 2-3/8" are available on order basis.
• For any technical information of our product, please consult with our sales representative.